Requirements

In order to test this design on hardware, you will need the following:

• Vivado 2025.2

• Vitis 2025.2

• For embedded Linux (Zynq-7000 and Zynq UltraScale+ targets), a Linux build machine with either PetaLinux Tools 2025.2 or the tools of the Yocto / EDF flow (Vitis 2025.2 and Google’s repo tool, see Yocto)

• Ethernet FMC or Robust Ethernet FMC

• Xilinx Soft TEMAC license

• One of the supported carrier boards listed below

List of supported boards

FPGA boards

Carrier board	Supported FMC connector(s)
AC701	HPC
KC705	HPC LPC
VC707	HPC1 HPC2
VC709	HPC
KCU105	HPC LPC
VCU108	HPC0 HPC1
VCU118	FMCP

Zynq-7000 boards

Carrier board	Supported FMC connector(s)
PicoZed 7015	LPC
PicoZed 7020	LPC
PicoZed 7030	LPC
ZC702	LPC1 LPC2
ZC706	LPC
ZedBoard	LPC

Zynq UltraScale+ boards

Carrier board	Supported FMC connector(s)
UltraZed-EV Carrier	HPC
ZCU102	HPC0 HPC1

For list of the target designs showing the number of ports supported, refer to the build instructions.